Marcus Andrey Study
Ler em português Library

Photography and Imagery · Step 5 · 6 min read

Blend modes and the maths behind them

Multiply, screen, overlay and the rest are not magic presets: each is a short formula applied to every pixel. What the main modes do, the maths in plain numbers, why mid grey disappears in overlay, and how the same modes work in Figma, Photoshop and CSS.

A blend mode is a rule for mixing two pixels, and once you know the rule you stop guessing. Most designers try modes one by one until something looks right. That works, but it's slow, and you can't explain the choice to anyone. Each mode is a small formula, the same in Figma, Photoshop and the browser. Learn five and you'll know what the rest do.

What you'll be able to do after reading:

  • Predict what multiply, screen, overlay, soft light and difference will do
  • Do the maths for one pixel, in plain numbers
  • Explain why some layers disappear in some modes
  • Use blend modes in Figma and CSS, and keep them contained

1. One layer, eight modes

The mug under a see-through red-to-blue gradient.Normal (60%)The layer, see-through
The mug darker and tinted red to blue; the shadows go nearly black.MultiplyCan only darken
The mug lighter and washed out with pink and lilac.ScreenCan only lighten
The mug with stronger contrast, warm on the left and cool on the right.OverlayMore contrast, tinted
The mug with a little more contrast and a soft red-to-blue tint.Soft lightGentler contrast
The mug in inverted, unnatural greens, yellows and purples.DifferenceSubtracts: strange colours
The mug keeps its light and shadow, recoloured from red to blue.ColorThe layer's colour, the photo's light
The mug almost disappears: the photo's colours flattened into the gradient's even light.LuminosityThe photo's colour, the layer's light
One photo, one gradient layer from red to blue, eight blend modes. Nothing changes but the mode. Multiply can only darken and screen can only lighten; overlay and soft light push the contrast; difference subtracts; color takes the layer's hue and keeps the photo's light; luminosity does the opposite. Live CSS, mix-blend-mode.Photo: Danielle MacInnes, Wikimedia Commons (from Unsplash), CC0.

Every tile is the same photo under the same red-to-blue gradient. Only the mode changes. The figure is live CSS: one mix-blend-mode per tile (MDN, mix-blend-mode).


2. The maths, in plain numbers

Think of every colour channel as a number from 0 (black) to 1 (white). The backdrop is what's underneath, the photo; the source is the layer on top. The W3C spec defines each mode as a formula of the two (W3C, Compositing and Blending Level 1). Take one pixel: photo 0.8, layer 0.5.

Mode Formula Result
Multiply photo × layer 0.8 × 0.5 = 0.4, darker
Screen photo + layer − photo × layer 0.8 + 0.5 − 0.4 = 0.9, lighter
Darken the smaller of the two 0.5
Lighten the larger of the two 0.8
Difference the gap between them 0.8 − 0.5 = 0.3

Two things fall out of the maths, and they're worth remembering:

  • Multiply can only darken, screen can only lighten. Multiplying by a number below 1 makes it smaller; white (1) changes nothing in multiply, and black (0) changes nothing in screen. That's why multiply is used for shadows and for putting a scanned drawing on paper over a photo: the white paper disappears.
  • That's how the duotone in the last lesson works. Multiply the grey photo over the light colour: the whites become the light colour. Then lighten with the dark colour: nothing gets darker than it, so the blacks become the dark colour.

3. Overlay and soft light: contrast modes

Overlay multiplies where the photo is dark and screens where it's light, so darks get darker and lights get lighter: more contrast, coloured by the layer. Soft light does the same, gentler. In the spec, overlay is hard light with the two layers swapped (W3C, overlay).

Try the maths with a layer of mid grey, 0.5, over our 0.8 pixel. In overlay, the photo is light, so the layer is screened with twice the photo minus one, 0.6: 0.5 + 0.6 − 0.5 × 0.6 = 0.8. Nothing changes. In soft light the result is also 0.8.

So mid grey is invisible in overlay and soft light. That's why retouchers paint light and shadow on a grey layer set to overlay, and why grain is usually laid over in overlay: the grey of the noise vanishes, and only its lighter and darker specks show. The next lesson uses exactly that.


4. Color and luminosity: splitting colour from light

The last group doesn't mix numbers channel by channel. It takes parts of one colour and parts of the other:

  • Color keeps the photo's light and takes the layer's hue and saturation: a way to tint a photo while keeping its detail.
  • Luminosity keeps the photo's colour and takes the layer's light.
  • Hue and saturation take just that one part.

5. The same modes everywhere

  • Figma offers the same families of modes on layers, fills and effects. Groups and frames have Pass through: their layers blend with everything underneath. Set the group to Normal and its blends stay inside it (Figma Help, blend modes).
  • Photoshop has the same modes and a few more of its own, with plain descriptions of each (Adobe, blending modes).
  • CSS has mix-blend-mode for an element over what's behind it, and background-blend-mode for background layers of one element. isolation: isolate is the CSS version of Figma's Normal group: the blend stays inside (MDN, isolation).
.photo        { position: relative; isolation: isolate; }   /* keep the blend inside */
.photo::after { content: ""; position: absolute; inset: 0;
                background: linear-gradient(135deg, #e5484d, #3e63dd);
                mix-blend-mode: soft-light; }

Forget isolation and a blended layer mixes with the page behind the photo too, which in dark mode can look completely different.


6. Common mistakes

  • Trying modes at random and keeping whichever looks least wrong.
  • Blending without isolation, so the result changes with the page background or the theme.
  • Using multiply on a dark photo and wondering why it went black.
  • Text set in a blend mode: it changes colour across the image and its contrast becomes unpredictable.

7. Vocabulary

Term Meaning
Backdrop What's underneath: the photo
Source The layer on top, being blended
Blend mode The formula that mixes source and backdrop for each pixel
Isolation Keeping a group's blends inside the group
Pass through Figma's group setting that lets blends reach everything below

8. Try it (no tools needed)

  1. Take a pixel of 0.2, a dark one, and a layer of 0.6.
  2. Work out multiply, screen and difference by hand.
  3. Before you calculate, guess which will be darkest. Then check.

Reflection questions: Which mode would you pick to darken a photo's edges, and which to make it glow? Could you now say why, to a developer?


9. If you already practise

  • Name the mode in the design file and the spec: "gradient in soft light, 60%", so the developer doesn't have to guess.
  • Always set isolation: isolate on the container of a blended layer, and test both themes.
  • Keep text out of blend modes; put it above, in normal mode, and check its contrast.

Checklist

Learn more

Books, courses and videos to go deeper

Book links go to Amazon. As an Amazon Associate I earn from qualifying purchases, at no extra cost to you.

Grade, black and white and duotone · Texture, grain and noise · Masks, clip paths and scrims

Saved only on this device.

↑ ↓ to move · Enter to open · Esc to close